Lighting your Pit BarrelÂź

Lighting the PBX

Lighting the PBX is almost identical to lighting the PBC and the PBJ. The only difference is to fill the charcoal basket, and additionally fill the chimney. Spread the lit coals from the chimney evenly over the full basket of unlit coals, then place in the PBX!

  

Lighting the PBX

Here you will find the correct way to light the PBX from Pit Barrel Cooker Co.!

 

What you need

Method 1 – Standard Hook ’n Hang Cooks

      1. Fill your  PBC  or  PBJ coal basket completely level with standard briquets.

      2. Remove briquets from charcoal basket and place in your Custom Pit BarrelŸ Chimney Starter.  For the  PBC,  this is approximately 40 briquets, and approximately 20 for the PBJ.

      3. Place coal basket with remaining 3/4 briquets in the bottom of the  Pit BarrelŸ.

      4. Set the grill grate in your cooker. Place a piece of the charcoal bag drizzled with some cooking oil, some crumpled newspaper. or a starter cube on the grate and light. Immediately place your  Custom Pit BarrelŸ Chimney Starter   on top.

      5. Let your coals burn approximately 12 minutes (increase for higher elevations). Remove the grate and evenly distribute the coals from the  Custom Pit BarrelŸ Chimney Starter  over the unlit coals in the charcoal basket.

      6. Begin your cook immediately.

Method 2 – Grilling

  1. Place the empty charcoal basket in the bottom of your  Pit BarrelŸ.

  2. Fill your  Custom Pit BarrelŸ Chimney Starter  with charcoal. We recommend lump charcoal for grilling, as it burns hotter than standard briquets, but this lighting method will work for briquets as well.

  3. Set the grill grate  in your cooker. Place a piece of the charcoal bag drizzled with some cooking oil, some crumpled newspaper. or a starter cube on the grate and light. Immediately place your  Custom Pit BarrelŸChimney Starter  on top.

  4. Wait approximately 12 minutes, and pour the contents of the  Custom Pit BarrelŸ Chimney Starter  into the empty coal basket.

  5. Add additional charcoal to the  Custom Pit BarrelŸ Chimney Starter  and evenly distribute over the hot coals, filling the charcoal basket, and place your grate in the cooker.

  6. Let the charcoal sit with the rebar out and lid cracked about an inch. Allow to heat up approximately 15 minutes with lump charcoal, and 20-25 minutes for briquets.

  7. Begin your cook.

 

 

Take the PBC to the next level!

Use these must-have accessories to get a perfect cook, every time! For the ultimate PBC experience we recommend the following items:

Â